Maxwell Lightning Protection Co.

	CB1B	Ridge Saddle Cast bronze ridge saddle with crimp cable holder.  4" X 8.5".  Approx. 5 oz.
	CB1A	Aluminum 4.5" X 10.75".  Approx. 5 oz.

	CB2B	Flat Top Cast bronze masonry or parapet base with crimp cable holder.  2" X 5.25".  Approx. 10.5 oz.  Available with 1/2" thread.
	CB2A	Aluminum Approx. 3.5 oz.

	CB2M	Masonry Base 1.5" X 4.875".  Approx. 6.2 oz.  3/8" thread only.
	CB2LM	Leaded

CB3B

Crimp Type Adhesive Base A cast bronze base with crimp cable holder.  Suitable for use on built-up single membrane or other roof surfaces where mechanical penetration must be avoided.  For use with compatible adhesives to roof surfaces.  3 1/2" X 3 1/4".  Approx. 12.3 oz.  For use with 3/8" diameter air terminals.

	CB4B	Top Mount Cast bronze top mount base with crimp cable holder.  1.875" X 3.125".  Approx. 5.5 oz.
	CB4A	Aluminum 2" X 4".  Approx. 2.4 oz.

	CB5B	Side Mount Cast bronze side mount base with crimp cable holder.  1.875" X 3.125".  Approx. 5.5 oz.
	CB5A	Aluminum 2" X 4".  Approx. 2.4 oz.

CB7B

Off-Set Cast bronze side mount base for 1 3/8" offsetting with crimp cable holder.  1.875" X 1/125".  Approx. 7.5 oz.

	CB8B	Cable - 3/8" Cast bronze cable to 3/8" threaded rod base with crimp cable holder.  0.625" X 4.5".  Approx. 4 oz.
	CB8L	Leaded

CB9B

Dual Threaded Cast bronze dual 3/8" threaded base for side or top mounting with crimp cable holder.  1.875" X 3.125".  Approx. 5.5 oz.  Use suffix "S" to request set screw.